D-800 Wet Injection Agent (Wet surface crack repair agent for concrete structures)
introduction
D-800 is the low viscosity injection material for damp area and recommended to use it after urethane water-stopping work for high efficiency
Uses
- Inject to wet surface.
- Application after urethane water-stopping work.
Characteristics
- Low Viscosity type, easy to mix.
- Easy to inject, and free from the influence of moisture.
- Excellent weather-resistance and mechanical strength.
Quality
Item |
quality |
|---|---|
Main Ingredients |
Epoxy Resin, Polyamidamin |
Color |
Lemon Yellow |
Mixing Ratio |
Resin : Hardener = 2 : 1 |
Pot Life |
Based on major material + hardening material 40min ± 10 (25℃)10 mixing ratio 100g |
Finger Touch Cure Time |
18hours ± 5 (25℃) |
Curing Time |
24 ~ 36hours(25℃) |
Application Range |
For injection to wet area |